Rust & Corrosion Removal
We strip rust and corrosion back to clean, bare metal on site, then seal it so it won't flash-rust before your painter arrives. Steel, iron, and trailer frames come out ready to recoat.
Learn More →Local. Mobile. Insured.
Sandblasting in Vancouver, Done On-Site
Mobile rust, paint, and coating removal across Metro Vancouver. Dustless wet blasting available. WorkSafe BC registered, fully insured, free written estimates.
WorkSafe BC & Insured
Fully licensed for commercial work
Free Written Estimates
No obligation
Serving Metro Vancouver
Mobile across the Lower Mainland
Dustless Blasting Available
Low-dust, thin-metal safe
What We Strip
Sandblasting Services for Metro Vancouver
Six core services — from rusted railings to commercial coating prep — all handled on-site by our mobile rig.
Paint & Coating Removal
We blast old paint, varnish, and failing coatings off steel, brick, and wood, leaving a clean surface that's ready to refinish. Faster and more thorough than scraping or sanding by hand.
Learn More →Concrete Cleaning & Restoration
We blast coatings, line paint, stains, and grime off concrete to expose a clean, sound surface ready for sealing, coating, or refinishing. Floors, decks, and walls come back to life.
Learn More →Dustless / Wet Blasting
Our dustless wet setup mixes water with the abrasive to suppress the vast majority of airborne dust and protect thin metal from warping. Ideal for delicate surfaces, occupied sites, and tight neighbourhoods.
Learn More →Industrial & Commercial Coating Prep
We blast structural steel and industrial surfaces to the exact profile your coatings supplier specifies, with WorkSafe BC documentation ready. Clean, contained prep that lets the new coating perform.
Learn More →Automotive & Marine Blasting
We blast vehicle frames, panels, boat hulls, and marine hardware clean on site, using dustless wet blasting to protect thin metal from warping. Mobile service that comes to your shop, driveway, or marina.
Learn More →
Why Vancouver Pro Sandblasting
We Bring the Blast Shop to You.
Plenty of shops will blast your parts if you can haul them across the city and wait. We bring the rig to your home, shop, marina, or job site instead, and we treat your property like it matters — masked, contained, and swept clean before we leave. When dust is a concern, our dustless wet setup keeps it down and protects thin metal from warping.
Fully Mobile
Our rig comes to your home, shop, marina, or job site across Metro Vancouver — no hauling heavy or awkward pieces across town.
Dustless Option
Our dustless wet setup suppresses the vast majority of airborne dust and runs cooler, protecting thin aluminum and light panels from warping.
WorkSafe BC & Insured
Registered and in good standing with WorkSafe BC, fully insured, with a letter of clearance available for commercial sites — and a free written estimate on every job.
How It Works
Your Surface Blasted Clean in 4 Steps
From the first call to a clean, primed surface — here's how a job runs.
Free Written Estimate
We look over the surface — on-site or from your photos — and send a written estimate covering the method, media, and cost before any work begins.
Mask & Contain
We sheet off and protect everything we're not blasting — glass, vehicles, landscaping, and neighbouring surfaces — so media stays where it belongs.
Blast It Clean
We strip the surface back to clean, profiled metal or concrete, choosing dry or dustless wet blasting based on the substrate and surroundings.
Prime & Clean Up
We can prime bare steel on the spot to stop flash-rust, then collect and haul away every bit of spent media before we leave.
Our Work
Get a Free Estimate →
Recent Vancouver Projects
A look at surfaces we've stripped back to clean, recoatable metal and concrete across Metro Vancouver.
What Your Neighbours Say
Trusted Across Metro Vancouver
From boat owners at the marina to strata managers and shop owners across the Lower Mainland — here's what people say about working with us.
"Had the hull on my sailboat stripped down before a repaint and these guys were the only ones who could come to the marina. Clean work, no overspray on the neighbouring boats, and they hauled away every bit of media. Couldn't ask for more."
"I was worried sandblasting would warp the thin aluminum on my boat, but they used their dustless wet setup and it came out perfect. Barely any dust on the driveway either. Really knew what they were doing."
"We needed our shop's roll-up doors and steel frames stripped before a repaint and the turnaround was faster than I expected. Showed up when they said, blasted everything down to clean metal, and we were painting the next morning."
10+
Communities Served
40 km
Mobile Service Radius
1–2 Days
Typical Job Turnaround
Ready to Get It Blasted Clean?
Send us the surface and your location, and we'll come take a look and provide a free, no-obligation written estimate — usually within one business day.
Common Questions
Sandblasting in Vancouver: Common Questions
Straight answers on cost, methods, surfaces, and the areas we cover before you book a free estimate.
Most sandblasting in the Lower Mainland runs roughly $4 to $12 per square foot, or about C$100 to $135 per hour including media, with small residential jobs often landing between $300 and $800. The surface, the coating, and access all move the number. We provide a free written estimate so the price reflects your actual job.
Yes — our whole operation is mobile. We bring the blasting rig to your home, shop, job site, or marina anywhere across Metro Vancouver, so there's no hauling heavy or awkward pieces across town. We contain the work area and clean up the spent media before we leave.
Dustless, or wet, blasting mixes water into the abrasive stream, which suppresses the vast majority of the airborne dust and runs cooler so thin metal is less likely to warp. Traditional dry blasting is faster and cuts harder, which suits heavy rust and industrial steel. We choose the method based on your surface and surroundings.
Yes — that's the core of what abrasive blasting does. It strips rust, paint, and failed coatings right back to bare, clean metal, leaving a profile that primer and paint can grip. On corroded steel we can apply a primer on the spot so the bare metal doesn't flash-rust.
Yes, when the media and pressure are matched to the surface. We dial it down for soft brick, heritage masonry, concrete, and thin metal, and often use the dustless wet method on delicate work. That cleans the surface effectively without gouging, etching, or warping it.
Where We Work
Serving Vancouver & the Lower Mainland
Our mobile rig covers Metro Vancouver and surrounding communities within roughly a 40 km radius.
Ready to Get Your Surface Blasted Clean?
Tell us what needs stripping and where it is, and we'll come take a look. You'll get a free written estimate covering the method, the media, and the cost before any work begins.
Call or Text Us
+1 (778) 200-1359
Hours
Mon–Fri 7am–5:30pm · Sat 8am–1pm
We've got your request!
We respond to all inquiries within one business day, and usually the same day on weekdays.
View full contact page